TA58L05, 06, 08, 09, 10, 12, 15S
Electrical Characteristics Common to All Products
• Tj = 25°C in the measurement conditions of each item is the standard condition when a pulse test is
carried out, and any drift in the electrical characteristic due to a rise in the junction temperature
of the chip may be disregarded.
Standard Application Circuit
CIN
0.1 μF
IN
OUT
TA58L**S
GND
COUT
More than 33 μF
Load
• Place CIN as close as possible to the input terminal and GND. Place COUT as close
as possible to the output terminal and GND. Although capacitor COUT acts to smooth
the dc output voltage during suspension of output oscillation or load change, it might
cause output oscillation in a cold environment due to increased capactor ESR. It is
therefore recommended to use a capacitor with small variations temperature sensitivity.
Also, ensure that the regulator performance is satisfactory over the operating temperature
range of the target system..
8
2006-11-02