Calling Line Identifier
FX602
1.6 Application Notes
1.6.1 'On-Hook' Operation
Figures 8a to 8c below illustrate the line signalling and FX602 I/O signals for typical 'On-Hook' (Calling Line ID)
BT and Bellcore system use.
The BT Tone Alert signal consists of simultaneous 2130Hz and 2750Hz tones. The 'Chan Seize' signal consists
of a '1010..' FSK bit sequence in all cases.
Note that the Data Retiming function is not used in these examples (RXCK is kept high).
Figure 8a : BT System signals
Figure 8b : Bellcore System signals
© 1998 Consumer Microcircuits Limited
14
D/602/7