SX1211
ADVANCED COMMUNICATIONS & SENSING
3.2.9.1. GUI Software
To aid the user with calculating appropriate R, P and S values, software is available to perform the frequency
calculation. Please refer to its user guide for assistance on its use.
3.2.9.2. SW .dll for Automatic Production Bench
The Dynamically Linked Library (DLL) used by the software to perform these calculations is also provided, free of
charge, to users, for inclusion in automatic production testing. Key benefits of this are:
No hand trimming of the reference frequency required: the actual reference frequency of the Device Under Test
(DUT) can be easily measured (e.g. from the CLKOUT output of the SX1211) and the tool will calculate the
best frequencies to compensate for the crystal initial error.
Channel plans can be calculated and stored in the application’s memory, then adapted to the actual crystal
oscillation frequency.
V3.0 – august 15th, 2007
Page 17 of 73
www.semtech.com