E-STLC3085 Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Fabricante
E-STLC3085 Datasheet PDF : 28 Pages
| |||
Electrical specification
STLC3085
Table 5. Electrical characteristics (continued)
Test conditions: Vpos = 6.0V, AGND = BGND, Normal Polarity, Tamb = 25°C.
External components as listed in the "Typical Values" column of EXTERNAL COMPONENTS Table.
Note: Testing of all parameter is performed at 25°C. Characterisation as well as design rules used allow correlation of
tested performances at other temperatures. All parameters listed here are met in the operating range: -40 to +85°C.
Symbol
Parameter
Test Condition
Min. Typ. Max. Unit
Ovl
TXoff
G24
G42
G24f
G24f
V2Wp
V2Wp
V4Wp
V4Wp
Thd
CLKfreq
2W overload level
TX output offset
Transmit gain abs.
Receive gain abs.
TX gain variation vs. freq.
RX gain variation vs. freq.
Idle channel noise at line 0dB
gainset
Idle channel noise at line 0dB
gainset
Idle channel noise at line 0dB
gainset
Idle channel noise at line 0dB
gainset
Total Harmonic Distortion
CLK operating range
at line terminals on ref. imped.
ACTIVE N. P., RL = 600Ω (1)
ACTIVE N. P., RL = 600Ω (1)
0dBm @ 1020Hz,
ACTIVE N. P., RL = 600Ω (1)
0dBm @ 1020Hz,
ACTIVE N. P., RL = 600Ω (1)
rel. 1020Hz; 0dBm,
300 to 3400Hz,
ACTIVE N. P., RL = 600Ω (1)
rel. 1020Hz; 0dBm,
300 to 3400Hz,
ACTIVE N. P., RL = 600Ω (1)
psophometric filtered
ACTIVE N. P., RL = 600Ω (1)
Tamb = 0 to +85°C
psophometric filtered
ACTIVE N. P., RL = 600Ω (1)
Tamb = -40 to +85°C
psophometric filtered
ACTIVE N. P., RL = 600Ω (1)
Tamb = 0 to +85°C
psophometric filtered
ACTIVE N. P., RL = 600Ω (1)
Tamb = -40 to +85°C
ACTIVE N. P., RL = 600Ω (1)
3.2
-250
-6.4
-0.4
-0.12
-0.12
dBm
250 mV
-5.6 dB
0.4
dB
0.12 dB
0.12 dB
-73 -68 dBmp
-68
dBmp
-75 -70 dBmp
-75
dBmp
-44
dB
-10% 125 10% kHz
RING
Vring Line voltage
RING D2 toggling @ fr = 25Hz
Load = 2REN;
Crest Factor = 1.25
41
45
1REN = 1800Ω + 1.0µF
Tamb = 0 to +85°C
Vrms
8/28
Share Link: 