PVC160206QYL02 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

PVC160206QYL02

CHARACTER TYPE LCD MODULE

Unspecified 

2. Since LCD panels tend to be easily damaged, they should be handled with full care. Avoid

any contact with materials that have a hardness of more than 2H.

3. Adhesives used for adhering upper/lower polarizers and aluminum plates are made of organic

substances that will deteriorate by chemical reactions with for example chemicals such as

acetone, toluene, ethanol, and isopropylalcohol. Please prevent the use of these chemicals and

contact us when it is necessary for you to use other chemicals.

4. Immediately wipe off saliva or water drops from the display area with an absorbent cotton

cloth, without scrubbing it. If adhered for a long period, such particles might cause

deformation or faded color.

5. Moisture deposited on the display surface and contact terminals due to low temperatures will

be a cause for polarizer damage, stains, and dirt. Before use, such panels should be slowly

warmed up to a temperature that is higher than room temperature.

6. Touching the display area and contact terminals with bare hands is harmful to polarizer and

may lead to poor insulation at the terminals.

7. The glass is fragile and can be cracked or chipped easily by handling, in particular on near its

edge. Please prevent sudden shocks or exposing the glass to other sorts of stress.

13.5 Long-term storage

For long- term storage the following methods are highly recommended:

1. Store the product in a polyethylene bag with a sealed opening to prevent fresh air entering

from the outside. Placing it with a desiccant is not necessary.

2. Store the product in a dark place, with the temperature in the range from 0 ℃ to 35 ℃.

3. Keep the sensitive polarizer surface of the LCD panels clear of any contact. We recommend

using the container that was used by Picvue to deliver the products.

13.6 Cleaning of the product

To clean the product make sure to use absorbent cotton cloth or other soft material like chamois.

Make sure to rub it gently, and do not use chemicals when cleaning.

14.0 FINAL REMARKS

1. The above specifications are the binding criteria for Picvue’s outgoing quality inspection.

2. The customer is kindly requested to inform Picvue as soon as possible on any questions,

remarks, and disagreements regarding these specifications.

3. Picvue is not responsible for damage to its products due to neglect of the precautions as

described in the previous chapter.

PICVUE ELECTRONICS, LTD.

P/N: PVC160206QYL02

VERSION: NEW

Page 19

Share Link: