Infrared Remote Control Transmitter IC
Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
PT2215
ROM
The ROM consists of 8 banks. Each bank provides 2 x 64 bytes. Please refer to the diagram below.
A bank is selected by using flip flops BS0 to BS2 which are the 3 highest address bits. In a single
system, these bits are loaded from the 3 MSBs of the Scan Control when KI0 = ”0”. During Power-On,
the bank select flip-flops will be in an arbitrary state.
When a key is activated, the key number if stored in the 6-bit key register. This register forms the lower
bits of the ROM Address. For each command, the ROM will be accessed twice giving a total of 16 bits
(M0L to M7L and M0H to M7H). The table below describes these bits.
PT2215 V1.1
-9-
April, 2006