PM6670S Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

PM6670S

Complete DDR2/3 memory power supply controller

STMicroelectronics 

PM6670S

Pin settings

Table 2. Pin functions (continued)

N°

Pin

Function

18

VCC

+5 V low-side gate driver supply. Bypass with a 100 nF capacitor to PGND.

Current sense input for the switching section. This pin must be connected

19

CSNS

through a resistor to the drain of the synchronous rectifier (RDSon sensing) to

set the current limit threshold.

20

PHASE Switch node connection and return path for the high-side gate driver.

21

HGATE High-side gate driver output

22

BOOT

Bootstrap capacitor connection. Positive supply input of the high-side gate

driver.

Linear regulator input. Connect to VDDQ in normal configuration or to a

23

LDOIN

lower supply to reduce the power dissipation. A 10 μF bypass ceramic

capacitor is suggested for noise rejection enhancement. See Section 7:

Device description on page 20

24

VTT

LDO linear regulator output. Bypass with a 20 μF (2x10 μF MLCC) filter

capacitor.

Doc ID 14432 Rev 4

7/54

Share Link: