PC8564A-1 Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza

componentes Descripción

Fabricante

PC8564A-1

Real time clock and calendar

NXP Semiconductors. 

NXP Semiconductors

PCF8564A

Real time clock and calendar

6. Read time registers to see the first change.

7. Apply 64 clock pulses to CLKOUT.

8. Read time registers to see the second change.

Repeat 7 and 8 for additional increments.

8.10 STOP bit function

The function of the STOP bit is to allow for accurate starting of the time circuits. The STOP

bit function will cause the upper part of the prescaler (F2 to F14) to be held in reset and

thus no 1 Hz ticks will be generated (see Figure 8). The time circuits can then be set and

will not increment until the STOP bit is released (see Figure 9 and Table 27).

26&,//$7256723

'(7(&725

UHVHW

26&,//$725

)

)

)

5(6(7

)

5(6(7

)

5(6(7

+]WLFN

6723

Fig 8. STOP bit functional diagram

+]

+]

+]

+]

&/.287VRXUFH

DDD

The STOP bit function will not affect the output of 32.768 kHz on CLKOUT, but will stop

the generation of 1.024 kHz, 32 Hz and 1 Hz.

The lower two stages of the prescaler (F0 and F1) are not reset and because the I2C-bus

is asynchronous to the crystal oscillator, the accuracy of re-starting the time circuits will be

between zero and one 8.192 kHz cycle (see Figure 9).

+]

VWRSUHOHDVHG

Fig 9. STOP bit release timing

—VWR—V

DDI

PCF8564A

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 3 — 26 August 2013

© NXP B.V. 2013. All rights reserved.

18 of 48

Share Link: