NXP Semiconductors
PCF2119x
LCD controllers/drivers
Table 27. Blink effect for icons and cursor character blink
Parameter
Even phase
Odd phase
cursor character blink block (all on)
normal (display character)
icons
state 1; CGRAM character 0 to 3 state 2; CGRAM character 4 to 7
display:
COL 1 to 5
COL 6 to 10
COL 76 to 80
ROW 17 – 1 2 3 4 5
6 7 8 9 10
76 77 78 79 80
ROW 18 – 81 82 83 84 85
86 87 88 89 90
block of 5 columns
Fig 21. CGRAM to icon mapping (a)
156 157 158 159 160
mgl249
icon no.
1-5
6-10
11-15
phase
even
even
even
ROW/COL
character codes
CGRAM address
CGRAM data
76543210 6543210 43210
MSB
LSB MSB
LSB MSB
LSB
icon view
17/1-5
00000000 0000000 10101
17/6-10
00000000 0000001 01010
17/11-15
00000000 0000010 01110
76-80
81-85
even
even
17/76-80
18/1-5
00000001
00000010
0001111
0010000
11111
11000
156-160
even
18/76-80
1-5
odd (blink) 17/1-5
00000011
00000100
0011111
0100000
11101
00000
156-160 odd (blink) 18/76-80
00000111 0111111 00110
mgk999
CGRAM data: logic 1 of a data bit turns the icon on and logic 0 turns the icon off.
Character codes: bits 0 to 3 define the icon state when icon blink is disabled or during the even phase when icon blink is
enabled. Bits 4 to 7 define the icon state during the odd phase when icon blink is enabled (not used for icons when icon blink is
disabled)
Fig 22. CGRAM to icon mapping (b)
PCF2119X_5
Product data sheet
Bit DM: When DM = 0, the chip is not in the direct mode. Either the internal VLCD
generator or an external voltage may be used to achieve VLCD.
When DM = 1, the chip is in direct mode. The internal VLCD generator is turned off and the
output VLCDOUT is directly connected VDD2 (i.e. the VLCD generator supply voltage).
Rev. 05 — 13 August 2009
© NXP B.V. 2009. All rights reserved.
36 of 79