To verify whether or not sector being protected, the sec-
tor address must appear on the appropriate highest order
address bit (see Table 1 and Table 2). The rest of address
bits, as shown in table 3, are don't care. Once all neces-
sary bits have been set as required, the programming
equipment may read the corresponding identifier code on
Q7~Q0.
MX29LV040C
TABLE 2. MX29LV040C AUTOMATIC SELECT MODE OPERATION
A18 A15
A8
Description
CE# OE# WE# | | A9 |
A16 A10
A7
Read
Manufacture Code L L H X X VID X
Silicon ID Device ID
L L H X X VID X
Sector Protection
Verification
L L H SA X VID X
A5
A6 | A1 A0
A2
L XL L
L XL H
L XH L
Q7~Q0
C2H
4FH
01H
(protected)
00H
(unprotected)
NOTE:SA=Sector Address, X=Don't Care, L=Logic Low, H=Logic High
P/N:PM1149
REV. 1.1, AUG. 30, 2005
5