MX29LV040C
Table 6. Write Operation Status
Status
Q7
Q6 Q5 Q3 Q2
(Note1)
(Note2)
Byte Program in Auto Program Algorithm
Q7# Toggle 0
N/A No
Toggle
Auto Erase Algorithm
0 Toggle 0
1 Toggle
In Progress
Erase Suspended Mode
Erase Suspend Read
(Erase Suspended Sector)
Erase Suspend Read
(Non-Erase Suspended Sector)
1
Data
No
0
Toggle
Data Data
N/A Toggle
Data Data
Erase Suspend Program
Q7# Toggle 0 N/A N/A
Byte Program in Auto Program Algorithm
Exceeded
Time Limits Auto Erase Algorithm
Erase Suspend Program
Q7# Toggle 1
0 Toggle 1
Q7# Toggle 1
N/A No
Toggle
1 Toggle
N/A N/A
Note:
1. Q7 and Q2 require a valid address when reading status information. Refer to the appropriate subsection for further
details.
2. Q5 switches to '1' when an Auto Program or Auto Erase operation has exceeded the maximum timing limits.
See "Q5:Exceeded Timing Limits " for more information.
P/N:PM1149
REV. 1.1, AUG. 30, 2005
11