MT9160B/61B
Advance Information
AC Electrical Characteristics†for Side-tone Path
Characteristics
Sym Min Typ‡ Max Units
Test Conditions
1 Absolute path gain
gain adjust = 0dB
GAS1 -17.43 -16.63 -15.83 dB RxINC = 0*
GAS2 -11.43 -10.63 -9.83 dB RxINC = 1*
M± inputs to HSPKR± outputs
1000 Hz at STG2=1
2 Tolerance of other side-tone
settings (-9.96 to 9.96 dB)
relative to output at 0dB setting
-0.5 +/-0.2 +0.5 dB
†AC Electrical Characteristics are over recommended temperature range & recommended power supply voltages.
‡ Typical ï¬gures are at 25 °C and are for design aid only: not guaranteed and not subject to production testing.
* Note: RxINC, refer to Control Register 1, address 00h.
Electrical Characteristics†for Analog Outputs
Characteristics
Sym Min Typ‡ Max Units
Test Conditions
1 EarpIece load impedance
2 Allowable earpiece capacitive
load
EZL 260 300
ECL
300
ohms
pF
across HSPKR±
each pin:
HSPKR+,
HSPKR-
3 Earpiece harmonic distortion
ED
0.5
% 300 ohms load across
HSPKR± (tol-15%),
VO≤693mVRMS, RxINC=1*,
Rx gain=0dB
†Electrical Characteristics are over recommended temperature range & recommended power supply voltages.
‡ Typical ï¬gures are at 25 °C and are for design aid only: not guaranteed and not subject to production testing.
* Note: RxINC, refer to Control Register 1, address 00h.
Electrical Characteristics†for Analog Inputs
Characteristics
Sym Min
1 Maximum input voltage without
overloading Codec
Typ‡
Max Units
Test Conditions
across M+/M-
VIOLH
2.90
1.03
Vp-p TxINC = 0, A/µ = 0*
Vp-p TxINC = 1, A/µ = 1*
Tx ï¬lter gain=0dB setting
2 Input Impedance
ZI
50
kΩ M+/M- to VSSA
†Electrical Characteristics are over recommended temperature range & recommended power supply voltages.
‡ Typical ï¬gures are at 25 °C and are for design aid only: not guaranteed and not subject to production testing.
* Note: TxINC, refer to Control Register 1, address 00h.
99