T-51382D064J-FW-P-AC Ver la hoja de datos (PDF) - Optrex Corporation

Número de pieza

componentes Descripción

Fabricante

T-51382D064J-FW-P-AC

LCD Module Technical Specification

Optrex Corporation 

Note: 1. (a)Bright point defect is defined as point defect of R,G,B with area >1/2 pixel

respectively.

(b)Bright point defect which is not visible by using 5% ND filter,is not counted as

a defect.

(c)Definition of distribution of point defect is as follows:

-min separation between point defect should be larger than 4mm.

(d)Definition of joined bright point defect is as follows:

-Three joined bright lot must be nil.

-Joined bright point is 3 pair max.

(e)Definition of joined dark point defect is as follows:

-Three jointed dark point must be nil.

-Coupling of one dark and one bright point in junction is counted as one dark and

one bright spot.

-Two dark point in junction is counted as one dark point.

Note:2. The external inspection is conducted at the distance 35±5cm between the eyes

of inspector and the panel. The inspection area is defined as full screen.

Note:3. Luminance measurement for contrast ratio is at the distance 50±5cm between the

detective head and the panel. With ambient illuminance less than 1 lux. Contrast

ratio is obtained at optimum view angle.

T-51382D064J-FW-P-AC (AC) No. 2002-0168

OPTREX CORPORATION

Page 22/24

Share Link: