MS-145-HRMJ-A-D Ver la hoja de datos (PDF) - HIROSE ELECTRIC

Número de pieza

componentes Descripción

Fabricante

MS-145-HRMJ-A-D

Interface Coaxial Switches

HIROSE ELECTRIC 

BPrecautions

1. Please select plugs according to the following applications.

Part No.

MS-145-C(LP)-1

MS-145-C(LP)-A

MS-145-C(LP)-MI

MS-145-HRMJ-A-D

MS-145-HRMP-A

MS-145-HRMJ

Engagement position

Engages up to a position (Q point) of 1.3 mm from the 5.06 mm diameter shoulder of the MS-145

Effective engagement

length (Nominal)

0.82mm

Engages by pushing up to the 5.06 mm diameter shoulder (P surface)

of the MS-145

1.32mm

Engages by pushing up to the 5.06 mm diameter shoulder (P surface) of the MS-145

0.82mm

"Q"point

3.65

1.3

Ø5.06

"P" surface

2. Applicable cable for plugs: 1.5D-HQEW or 1.5D-QEW (manufactured by Fujikura Ltd.).

3. No cleaning is needed after soldering or cable termination.

4. Please design avoiding holes so that force is not applied to this product from the case

when dropped in the board mounted condition.

5. When mounted as the RF interface of a Mobile Phone, please consider using a rubber

cap when the plug is not engaged to prevent dust from entering.

115

Share Link: