MAX9155 Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Fabricante
MAX9155 Datasheet PDF : 9 Pages
| |||
Low-Jitter, Low-Noise LVDS
Repeater in an SC70 Package
AC ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +3.6V, RL = 100Ω ±1%, CL = 10pF, |VID| = 0.15V to 1.2V, VCM = |VID / 2| to 2.4V - |VID / 2|, TA = -40°C to +85°C,
unless otherwise noted. Typical values are at VCC = +3.3V, TA = +25°C.) (Notes 3, 4, 5) (Figures 3, 4)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Differential Propagation Delay High to
Low
tPHLD
1.3
2.0
2.8
ns
Differential Propagation Delay Low to
High
Added Deterministic Jitter (Notes 6, 11)
Added Random Jitter (Notes 7, 11)
Differential Part-to-Part Skew (Note 8)
Differential Part-to-Part Skew (Note 9)
Switching Supply Current
Rise Time
Fall Time
Input Frequency (Note 10)
tPLHD
tDJ
tRJ
tSKPP1
tSKPP2
ICCSW
tTLH
tTHL
fMAX
200Mbps 223-1 PRBS data pattern
fIN = 100MHz
1.3
2.0
2.8
ns
23
100 psp-p
0.6
2.9 psRMS
0.17 0.6
ns
1.5
ns
11.3
18
mA
0.5
0.66
1.0
ns
0.5
0.64
1.0
ns
100
MHz
Note 1: All devices are 100% tested at TA = +25°C. Limits over temperature are guaranteed by design and characterization.
Note 2: Current into a pin is defined as positive. Current out of a pin is defined as negative. All voltages are referenced to ground
except VTH, VTL, VOD, and ∆VOD.
Note 3: Guaranteed by design and characterization.
Note 4: Signal generator output (unless otherwise noted): frequency = 100MHz, 50% duty cycle, RO = 50Ω, tR = 1.5ns, and tF =
1.5ns (0% to 100%).
Note 5: CL includes scope probe and test jig capacitance.
Note 6: Signal generator output for tDJ: VOD = 150mV, VOS = 1.2V, tDJ includes pulse (duty-cycle) skew.
Note 7: Signal generator output for tRJ: VOD = 150mV, VOS = 1.2V.
Note 8: tSKPP1 is the magnitude difference of any differential propagation delays between devices operating over rated conditions
at the same supply voltage, input common-mode voltage, and ambient temperature.
Note 9: tSKPP2 is the magnitude difference of any differential propagation delays between devices operating over rated conditions.
Note 10: Device meets VOD DC specification and AC specifications while operating at fMAX.
Note 11: Jitter added to the input signal.
_______________________________________________________________________________________ 3
Share Link: 