M95160-RMC6P(2014) Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Fabricante
M95160-RMC6P Datasheet PDF : 47 Pages
| |||
M95160 M95160-W M95160-R M95160-DF
DC and AC parameters
Table 18. AC characteristics (M95160-R or M95160-DF, device grade 6)
Test conditions specified in Table 9 or Table 10 and Table 11(1)
Symbol Alt.
Parameter
Min.
Max. Unit
fC
fSCK Clock frequency
D.C.
5
MHz
tSLCH tCSS1 S active setup time
60
-
ns
tSHCH tCSS2 S not active setup time
60
-
ns
tSHSL tCS S deselect time
90
-
ns
tCHSH tCSH S active hold time
60
-
ns
tCHSL
tCH(2)
tCL(2)
tCLCH(3)
tCHCL(3)
S not active hold time
tCLH Clock high time
tCLL Clock low time
tRC Clock rise time
tFC Clock fall time
60
-
ns
80
-
ns
80
-
ns
-
2
µs
-
2
µs
tDVCH tDSU Data in setup time
20
-
ns
tCHDX tDH Data in hold time
20
-
ns
tHHCH
Clock low hold time after HOLD not active
60
-
ns
tHLCH
Clock low hold time after HOLD active
60
-
ns
tCLHL
Clock low set-up time before HOLD active
0
-
ns
tCLHH
Clock low set-up time before HOLD not active
tSHQZ(3) tDIS Output disable time
0
-
ns
-
80
ns
tCLQV tV Clock low to output valid
-
80
ns
tCLQX
tQLQH(3)
tQHQL(3)
tHO Output hold time
tRO Output rise time
tFO Output fall time
0
-
ns
-
80
ns
-
80
ns
tHHQV
tHLQZ(3)
tLZ HOLD high to output valid
tHZ HOLD low to output high-Z
-
80
ns
-
80
ns
tW
tWC Write time
-
5
ms
1. If the application uses the M95160-R or M95160-DF devices at 2.5 V ≤VCC ≤5.5 V and -40 °C ≤TA ≤+85 °C,
please refer to Table 15: DC characteristics (M95160-W, device grade 6), rather than to the above table.
2. tCH + tCL must never be lower than the shortest possible clock period, 1/fC(max).
3. Characterized only, not tested in production.
DocID022580 Rev 5
37/47
46
Share Link: 