M65580MAP Ver la hoja de datos (PDF) - Renesas Electronics
Número de pieza
componentes Descripción
Fabricante
M65580MAP Datasheet PDF : 34 Pages
| |||
M65580MAP-XXXFP
Recommended Operating Condition
(Ta = –20 to 65°C, unless otherwise noted)
Item
Symbol
Min
Typ
Supply voltage (MCU) Note3
VDD (MCU)
4.75
5.0
Supply voltage (Digital)
VDD (Digital)
4.75
5.0
Supply voltage (Input)
VDD (Input)
3.13
3.3
Supply voltage (Output)
VDD (Output)
3.13
3.3
Supply voltage (VCXO)
VDD (VCXO)
4.75
5.0
Supply voltage (DEF)
VDD (DEF)
4.75
5.0
High input voltage
P00-P07, P10-P16, P20-P27, P50, VIH1 (MCU)
0.8 VCC
—
P51, RESETB, XIN
High input voltage
SCL1, SCL2, SDA1, SDA2
(When using I2C-Bus)
VIH2 (MCU)
0.7 VCC
—
Max
5.25
5.25
3.47
3.47
5.25
5.25
VCC
VCC
Unit
V
V
V
V
V
V
V
V
High input voltage
RESETB, FBP IN, HALF TONE, VIH3 (ASIC) 0.8 VCC
—
OSD (R/G/B) IN, FAST BLK
VCC
V
Low input voltage
P00-P07, P10-P16, P20-P27
VIL1 (MCU)
0
Low input voltage
SCL1, SCL2, SDA1, SDA2
(When using I2C-Bus)
VIL2 (MCU)
0
Low input voltage Note4
P50, P51, RESETB, XIN, TIM2,
VIL3 (MCU)
0
TIM3, INT1, INT2, INT3, SIN, SCLK
Low input voltage
RESETB, FBP IN, HALF TONE, VIL4 (ASIC)
0
OSD (R/G/B) IN, FAST BLK
—
0.4 VCC
V
—
0.3 VCC
V
—
0.2 VCC
V
—
0.2 VCC
V
High average output
P10-P16, P20-P27, P30, P31,
IOH (MCU)
—
—
current Note1
P52, P53
1
mA
Low average output
P00-P07, P10, P15, P16,
IOL1 (MCU)
—
—
current Note2
P20-P27, P30, P31, P52, P53
2
mA
Low average output
current Note2
P11-P14
IOL2 (MCU)
—
—
6
mA
Oscillation frequency
XIN
(for CPU operation) Note5
f(XIN) (MCU)
7.9
8.0
8.1 MHz
Oscillation frequency
XCIN
(for sub-clock operation)
f(XCIN) (MCU)
29
32
35
kHz
Oscillation frequency
FSCIN
(for OSD standard clock)
FSCIN (MCU)
—
3.58
—
MHz
Input frequency
TIM2, TIM3, INT1, INT2, INT3
fhs1 (MCU)
—
—
100
kHz
Input frequency
SCLK
fhs2 (MCU)
—
—
1
MHz
Input frequency
SCL1, SCL2
fhs3 (MCU)
—
—
400
kHz
Input amplitude video
CVIN
VI (MCU)
1.5
2.0
2.5
V
signal
Notes: 1. The total current that flows out the MCU must be 20 mA or less.
2. The total input current to MCU (IOL1 + IOL2) must be 30 mA or less.
3. Use a quartz-crystal oscillator or a ceramic resonator for the CPU oscillation circuit. When using the data
slicer, use 8 MHz.
4. Pin name in each parameter is described pin names.
(1) Dedicated pins: dedicated pin name.
(2) Double-/Triple-function ports.
When the same limits: I/O port name.
When the limits of function except ports are different from I/O port limits; function pin name.
5. P06, P07, P15, P23, P24 have the hysteresis when these pins are used as interrupt input pins or timer pins.
P11-P14 have the hysteresis when these pins are used as multi-master I2C-Bus interface ports.
P20-P22 have the hysteresis when these pins are used as serial I/O pins.
REJ03F0184-0201 Rev.2.01 Mar 31, 2008
Page 17 of 33
Share Link: 