M29W320DB Ver la hoja de datos (PDF) - Numonyx -> Micron

Número de pieza

componentes Descripción

Fabricante

M29W320DB

32 Mbit (4Mbx8 or 2Mbx16, Non-uniform Parameter Blocks, Boot Block), 3V Supply Flash memory

Numonyx -> Micron 

M29W320DT, M29W320DB

Command Interface

4.11

Erase Resume command

The Erase Resume command must be used to restart the Program/Erase Controller after an

Erase Suspend. The device must be in Read Array mode before the Resume command will

be accepted. An erase can be suspended and resumed more than once.

4.12

Block Protect and Chip Unprotect commands

Each block can be separately protected against accidental Program or Erase. The whole

chip can be unprotected to allow the data inside the blocks to be changed.

Block Protect and Chip Unprotect operations are described in Appendix C: Block Protection.

21/56

Share Link: