M29W128FL Ver la hoja de datos (PDF) - Numonyx -> Micron

Número de pieza

componentes Descripción

Fabricante

M29W128FL

128 Mbit 3V Supply Flash Memory

Numonyx -> Micron 

Flowcharts

M29W128FH, M29W128FL

2. A Write to Buffer and Program Abort and Reset must be issued to return the device in Read mode.

3. When the block address is specified, any address in the selected block address space is acceptable. However when

loading Write Buffer address with data, all addresses must fall within the selected Write Buffer page.

4. DQ7 must be checked since DQ5 and DQ7 may change simultaneously.

5. If this flowchart location is reached because DQ5=’1’, then the Write to Buffer and Program command failed. If this

flowchart location is reached because DQ1=’1’, then the Write to Buffer and Program command aborted. In both cases, the

appropriate reset command must be issued to return the device in Read mode: a Reset command if the operation failed, a

Write to Buffer and Program Abort and Reset command if the operation aborted.

6. See Table 9 and Table 10, for details on Write to Buffer and Program command sequence.

76/78

Share Link: