LICAL-ENC-MS001 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

LICAL-ENC-MS001

MS Series Encoder Module Data Guide

Unspecified 

SEND Mode

When the SEND line goes high the encoder will enter Send Mode. The

encoder will pull the TX_CNTL line high to activate the transmitter, record

the state of the data lines, assemble the packet, and send it through the

DATA_OUT line. It will continue doing this for as long as the SEND line is

high, updating the state of the data lines with each transmission. Once

SEND is pulled low the encoder will finish the current transmission, pull

TX_CNTL low to deactivate the transmitter, and go to sleep.

For simple applications that require only a single input, SEND can be tied

directly to the data input line, allowing a single connection. If additional lines

are used in this manner, diodes or dual contact switches will be necessary

to prevent voltage on one data line from activating all of the data lines.

The Application Example section demonstrates the use of diodes for this

purpose.

– 12 –

Share Link: