L6226Q
Paralleled operation
Figure 16. Parallel connection with lower overcurrent threshold
It is also possible to parallel the four half bridges to obtain a simple half bridge as shown in
Figure 17. In this configuration the, the over current threshold is equal to twice the minimum
threshold set by the resistors RCLA or RCLB in Figure 17. It is recommended to use
RCLA = RCLB.
The resulting half bridge has the following characteristics.
● Equivalent device: half bridge
● RDS(on) 0.18 Ω typ. value @ TJ = 25 °C
● 2.8 A max RMS load current
● 5.6 A max OCD threshold
Doc ID 14335 Rev 5
21/29