DS56-L492-001 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

DS56-L492-001

SmartACFL Modem

Unspecified 

V.90/K56flex Modem Device Sets with SmartDAA Technology for Low Power Applications

SmartACFL

MDP (P9373) Hardware Pins and Signals

General

The major functional application signals are

summarized below.

System Control and Status

The following discrete signals are used by the host to

control and monitor MDP operation:

• Wakeup Reset (WKRES#); input

• Interrupt Request for MDP Interface (IRQ); output

• Raw Ring (SSD_RING#); output

• Ring Wake Reset (SSD_RINGWAKE#); output

• SmartDAA Interrupt for SmartDAA Interface

(SSD_INT); output

Digital Speaker Interface

The following output is used for audible call progress

or carrier monitoring in Data/Fax mode only where

sound quality is not important.

• Digital Speaker Output (DSPKOUT); output

Host Parallel Bus Interface

The parallel address, data, and control signals are:

• Address Lines (A[6:0]); input

• Data Lines (D[7:0]), input/output

• Chip Select (CS#); input

• Read Enable (READ#); input

• Write Enable (WRITE#); output

Host Serial Data Interface

The serial data and clock signals are:

• Receive Data (RXD); output

• Receive Data Clock (RXCLK); output

• Transmit Data (TXD); input

• Transmit Data Clock (TXCLK); output

Host Serial Voice Interface (S models)

The serial data and clock signals are:

• Serial Data Out (SI_DD); output

• Serial Data In (SI_DU); input

• Serial Shift Clock (SI_CLK); input

• Sample Shift Clock (SI_FRAME); input

LSD Interface (Through DIB)

The DIB interface signals are:

• Clock and Power Positive (PWRCLKP); output

• Clock and Power Negative (PWRCLKN); output

• Data Positive (DIB_DATAP); input/output

• Data Negative (DIB_DATAN); input/output

VC Interface

The VC interface signals are:

• Sleep (IASLEEP); output

• Master Clock (M_CLK); output

• Voice Serial Clock (V_SCLK); output

• Voice Serial Control (V_CTRL); output

• Voice Serial Frame Sync (V_STROBE); input

• Voice Serial Transmit Data (V_TXSIN); output

• Voice Serial Receive Data (V_RXOUT); input

MDP Signal Interface and Pin Assignments

The MDP (P9373) 100-pin TQFP hardware interface

signals are shown in Figure 5.

The MDP (P9373) 100-pin TQFP pin signals are

shown in Figure 6.

Doc. No. 100444A

Conexant

13

Proprietary Information

Share Link: