HR30-10R-12P(71)(2004) Ver la hoja de datos (PDF) - HIROSE ELECTRIC
Número de pieza
componentes Descripción
Fabricante
HR30-10R-12P(71) Datasheet PDF : 12 Pages
| |||
BGeneral usage notes
1. Mating
Mounting panel
Receptacle
D Plug
C
Cable
A
Alignment marks
D
C
2. Un-mating
Push/pull locking collar
Cable
B
When mounting, smooth mating will be achieved by holding plug
When removing the plug from its connected condition, hold the
in any are “A” and aligning the arrow of the plug with that of the
plug by push/pull locking collar (area “B”) and pull straight off.
receptacle ,then pushing the plug straight in.
BPrecautions
1. Do NOT apply force in excess of 30N in the directions shown below.
30 N max.
Panel
30 N max.
30 N max.
2. To maintain the water/dust protection performance and the cable clamp force, use a cable that is within the range of applicable cable diameter.
3. Consult HRS representative when using different cables.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
12
Share Link: 