SL2017
ELECTRICAL CHARACTERISTICS
These characteristics are guaranteed by either production test or design. They apply within the specified
ambient temperature and supply voltage unless otherwise stated.
TAMB = -20°C to + 80°C, VCC= + 4.75V to 5·25V.
IF = 403.25MHz or 479.5MHz; IF bandwidth up to 54MHz maximum. RF input frequency = 950MHz -2150MHz.
Characteristic
LO leakage to RF input
Value
Pin
Min Typ Max
2,3,6,7
-20
LO leakage to IF outputs
6,7,10,11
-10
14,15
AGC gain control slope variation
16
AGC control input current
16 -250
250
Output select low voltage
9
0.7
Output select high voltage
Output select low current
9 V -0.7
CC
9
-50
Output select high current
9
200
IF output 1 & 2
10,11,
14,15
Output impedance
50
Return loss
12
IF output 1 to 2 isolation
10,11 30
14,15
Units
dBr
dBm
µA
V
V
µA
µA
Ω
dB
dB
Conditions
Relative to single ended input LO drive
level
Maximum conversion gain
Monotonic from VEE to VCC. See Fig. 9
O/P 2 enabled, O/P 1 disabled
O/P 1 enabled, O/P 2 disabled
Output in enabled and disabled state
Single ended
Notes:
1. All dBm units refer to a 50Ω system
2. Applies for any two carriers within band at -19dBm, and with AGC set for +5dB conversion gain.
14