EM78815H Ver la hoja de datos (PDF) - ELAN Microelectronics

Número de pieza

componentes Descripción

Fabricante

EM78815H

8 Bit Microcontroller

ELAN Microelectronics 

EM78815

8-Bit Microcontroller

APPENDIX

A Application Note

1. In targeting interrupt and program run to address 0x0008, ACC, R3 (Status), R5

(Program Page) and R4 (6, 7) will be automatically saved and R3 (6, 7) R register

page will be set to Page 0, and reload after the instruction “RETI”.

2. 0V reference voltage will power down when both RD Page 2 Bit 7 (DAREF) and

RA Page 2 Bit 7 (CMPEN) are cleared to 0.

3. Before using Keytone function, set Port 76 as output type.

4. For accessing data ROM, EM78P815 (OTP) can work at 10.74MHz, but note that

only ROM type EM78815 can work at 5.3MHz.

5. While switching the main clock (regardless of high freq to low freq or vice versa),

adding 6 instructions delay (NOP) is required.

6. Do not switch the MCU operation mode from normal mode to sleep mode directly.

Before going into sleep mode, switch the MCU to green mode first.

7. Always keep RA Page 0 Bit 7 = 0, otherwise, unexpected error will occur.

Product Specification (V2.4) 08.01.2004

75

(This specification is subject to change without further notice)

Share Link: