AS1526-BSOT Ver la hoja de datos (PDF) - austriamicrosystems AG

Número de pieza

componentes Descripción

Fabricante

AS1526-BSOT

10-Bit, Single Supply, Low-Power, 73ksps A/D Converters

austriamicrosystems AG 

AS1526/AS1527

Data Sheet - Detailed Description

Figure 30. Supply Current vs. Sampling Rate

10000

1000

100

Internal Reference

10

1

0.1

0.1

External Reference

3V

3V

10

1000

100000

Sam pling Rate (s ps )

Figure 31. Powerup Time vs. Time in Shutdown

800

700

Internal Reference

600

500

400

300

200

100

0

0.001 0.01

0.1

1

10

Tim e in Shutdown (s )

Internal 2.5V Reference (AS1526)

The AS1526 internal 2.5V reference output is connected to pin REF and also drives the internal DAC (see Figure 24

on page 11). REF output can be used as a reference voltage source for other components and can source up to

400µA.

The internal reference is enabled by pulling pin SHDNN high. Letting SHDNN float disables the internal reference,

which allows the use of an external reference (see External Reference on page 15).

Pin REF should be bypassed with a 4.7µF capacitor as shown in Figure 23 on page 11. Larger capacitors increase

wake-up time when the devices exit shutdown mode (see Layout Considerations on page 18)

External Reference

Both devices can operate with an external reference at pin REF. The external reference should be within the +1.0V to

VDD voltage range to achieve specified accuracy. The minimum input impedance is 18kΩ for DC currents.

Note: To use an external reference with the AS1526, disable the internal reference by letting pin SHDNN float.

During conversion, the external reference should be capable of delivering up to 250µA of DC load current and have an

output impedance ≤ 10Ω. The recommended minimum value for the bypass capacitor is 0.1µF. If the reference has

higher output impedance or is noisy, bypass it close to pin REF with a 4.7µF capacitor.

www.austriamicrosystems.com

Revision 1.03

15 - 21

Share Link: