AMD-762 Ver la hoja de datos (PDF) - Advanced Micro Devices
Número de pieza
componentes Descripción
Fabricante
AMD-762 Datasheet PDF : 122 Pages
| |||
24416C—December 2001
Preliminary Information
AMD-762™ System Controller Data Sheet
Many Segments
VTT
Part of Output Transistors
INP
Transmission Line
+
OUT
INN
VTT/2
-
Driver
Receiver
Figure 3. Push-Pull Transmission Line Example
The dynamic compensation scheme implements a dummy
driver with characteristics exactly matching the normal driver.
An external precision resistor is attached, and the voltage of
the resulting voltage divider is compared to VTT/2. The drive
strength is then adjusted until a voltage near VTT/2 is achieved.
The output impedance then roughly matches the resistor value.
Separate compensation is performed for the N and P
transistors. The drive strength is changed in small steps when
no data is being driven. Refer to Figure 4.
VTT
50 Ohms + 1%
INP
+
-
VTT/2
INN
Dummy Driver
Figure 4. Dummy Load with External Compensation Resistors
50 Ohms + 1%
Chapter 2
Functional Operation
9
Share Link: 