AGM2432D Ver la hoja de datos (PDF) - AZ Displays

Número de pieza

componentes Descripción

Fabricante

AGM2432D

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

AZ Displays 

11 QUALITY AND RELIABILITY

11.1 TEST CONDITIONS

Tests should be conducted under the following conditions :

Ambient temperature : 25 ± 5°C

Humidity

: 60 ± 25% RH.

11.2 SAMPLING PLAN

Sampling method shall be in accordance with MIL-STD-105E , level II, normal

single sampling plan .

11.3 ACCEPTABLE QUALITY LEVEL

A major defect is defined as one that could cause failure to or materially reduce the

usability of the unit for its intended purpose. A minor defect is one that does not materially

reduce the usability of the unit for its intended purpose or is an infringement from established

standards and has no significant bearing on its effective use or operation.

11.4 APPEARANCE

An appearance test should be conducted by human sight at approximately 30 cm

distance from the LCD module under fluorescent light. The inspection area of LCD panel

shall be within the range of following limits.

AZ DISPLAYS, INC.

12

Share Link: