ADM8845(RevD) Ver la hoja de datos (PDF) - Analog Devices

Número de pieza

componentes Descripción

Fabricante

ADM8845
(Rev.:RevD)

Charge Pump Driver for LCD White LED Backlights

Analog Devices 

ADM8845

Data Sheet

APPLICATIONS INFORMATION

LAYOUT CONSIDERATIONS AND NOISE

Because of the s switching behavior of the ADM8845, PCB

trace layout is an important consideration. To ensure optimum

performance, a ground plane should be used, and all capacitors

(C1, C2, C3, C4) must be located with minimal track lengths to

the pins of the ADM8845.

WHITE LED SHORTING

If an LED is shorted, the ADM8845 continues to drive the

remaining LEDs with ILED per LED (ILED = ISET × 120 mA). This

is because the ADM8845 uses six internal currents sinks to

produce the LED current. If an LED is shorted, the ADM8845

continues to sink (ISET × 120 mA) as programmed by RSET

through the shorted LED.

DRIVING FEWER THAN SIX LEDs

The ADM8845 can be operated with fewer than six LEDs in

parallel by simply leaving the unused FBx pins floating or

connected to GND. For example, Figure 28 shows five LEDs

being powered by the ADM8845, and Figure 29 shows three

main LEDs and one sub LED.

LCD

VCC

2.6V–5.5V

CTRL1

CTRL2

VOUT

ADM8845

FB1

FB2

FB3

FB4

GND

FB5

FB6

Figure 28. Driving Five White LEDs

MAIN DISPLAY

SUB DISPLAY

VCC

2.6V–5.5V

RSET

VOUT

ADM8845

CTRL1

FB1

CTRL2

FB2

FB3

FB4

ISET

GND

FB5

FB6

MAIN DISPLAY

Figure 29. Driving Three Main LEDs and One Sub LED

VCC

2.6V–5.5V

RSET

VOUT

ADM8845

CTRL1

FB1

CTRL2

FB2

FB3

FB4

ISET

GND

FB5

FB6

Figure 30. Typical Application Diagram

Rev. D | Page 14 of 18

SUB DISPLAY

Share Link: