AD394 Ver la hoja de datos (PDF) - Analog Devices

Número de pieza

componentes Descripción

Fabricante

AD394

uP Compatible Multiplying Quad 12-Bit D/A Converter

Analog Devices 

AD394

PACKAGE OUTLINE

1.575 (40.01) MAX

28

15

0.810 (20.57)

0.770 (19.56)

1

14

0.225 (5.72)

MAX

PIN 1

SEE NOTE 1

0.035 (0.89)

0.015 (0.38)

SEE NOTE 3

0.145 (3.68)

MIN

0.023 (0.58) 0.100 (2.54) 0.070 (1.78)

0.014 (0.36)

BSC

0.030 (0.76)

SEE NOTE 4, 7 SEE NOTE 2

0.180 (4.57)

MIN

0.137 (3.48)

MAX

SEE NOTE 5

0.620 (15.75)

0.550 (13.97)

SEE NOTE 6

0.015 (0.38)

0.008 (0.20)

NOTES

1. INDEX AREA; A NOTCH OR A LEAD ONE IDENTIFICATION MARK IS LOCATED ADJACENT TO LEAD ONE.

2. THE MINIMUM LIMIT FOR DIMENSION MAY BE 0.023" (0.58 mm) FOR ALL FOUR CORNER LEADS ONLY.

3. DIMENSION SHALL BE MEASURED FROM THE SEATING PLANE TO THE BASE PLANE.

4. THE BASIC PIN SPACING IS 0.100" (2.54 mm) BETWEEN CENTERLINES.

5. APPLIES TO ALL FOUR CORNERS.

6. MEASURED AT THE CENTERLINE OF THE LEADS.

7. TWENTY SIX SPACES.

8. CONTROLLING DIMENSIONS ARE IN INCHES. MILLIMETER DIMENSIONS ARE ROUNDED-OFF MILLIMETER

EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN

Figure 17. 28-Lead Bottom-Brazed Ceramic DIP for Hybrid [BBDIP/H]

(DH-28A)

Dimensions Shown in Inches and (Millimeters)

Note: Squared Corner and Dot in Shaded Area Indicate Pin 1.

ORDERING GUIDE

Model

Temperature Range

AD394TD

−55°C to +125°C

AD394TD/883B

−55°C to +125°C

Gain Error

±2 LSB

±2 LSB

Linearity Error (TMIN–TMAX)

±1/2 LSB

±1/2 LSB

© 2004 Analog Devices, Inc. All rights reserved. Trademarks and

registered trademarks are the property of their respective owners.

C04851-0-9/04(A)

Rev. A | Page 12 of 12

Share Link: