4-1437290-1 Ver la hoja de datos (PDF) - Tyco Electronics

Número de pieza

componentes Descripción

Fabricante

4-1437290-1

SUPER SEAL CONNECTOR

Tyco Electronics 

Product Specification

108-78140

9.17 High-Pressure Cleaning Test

Water-Jet Pressure: 80Kgf/c㎡

Water Quantity: 600l/hr

Distance between Water-Nozzle and connector: 300mm

Water-Jet Direction: Fig. 10

Test Cycle: Keep connector at 100℃ atomosphere

↓

Water-jet cleaning 30 sec.

↓

Natural cooling 1 minute

↓

Repeat 10 cycles

Fig. 10

Sealing

ＢＡ

60°

60°

Fixed

10. TEST CONDITION

(1) Contact and housing to be tested are to be selected randomly.

(2) Contact and housing to be tested are to be crimped with wire of the

maximum size except when otherwise noted. Wire length shall be decided

each time.

(3) Wire used in the tests should have enough performance of Heatstability

and Solvent-resistance.

(4) Test is to be made in the normal temperature and humidity except when

otherwise noted.

(5) Test is to be made with the connector mated except when otherwise noted.

(6) Tolerance of the test conditions is ±10% except when otherwise noted.

(7) Quantity of test sample will be

adjusted depending on situation.

(8) Measurement for each test is to be made on 2 positions or more.

11. PACKAGING AND MARKING

Packaging units will each contain suitable quantities of the product. Arrangements

for transport and storage shall be such that no loss or damage is suffered. The

following labeling will be displayed.

・ Product description or Cat. No.

・ Quantity contained

・ Manufacturer’s name or abbreviated name

・ Date of manufacture or Lot. No.

Rev. A8

20 of 41

Share Link: