Philips Semiconductors
2 × 1.4 W BTL audio amplifiers with digital
volume control and headphone sensing
Preliminary specification
TDA8552T; TDA8552TS
Application without volume control
If pins 6, 7 and 8 are hardwired together the device operates with the volume control setting at maximum.
When the supply voltage is connected and the device is switched from standby to mute or operating for the first time then
the gain is ramped up from −20 dB to +20 dB. This takes approximately 5 s.
This maximum gain setting is maintained until the supply voltage drops below the minimum value.
handbook, full pagewidth
balance left
VDD
VDD
up
volume
down
VDD
balance right
2.2 kΩ
UP/DOWN1
6
100 nF
TDA8552T
2.2 kΩ
UP/DOWN2
7
100 nF
MGM612
Fig.5 Volume and balance control using buttons.
1998 Jun 02
16