Electrical specifications
VN750SMP-E
Because Is(OFF) may significantly increase if Vout is pulled high (up to several mA), the pull-
up resistor RPU should be connected to a supply that is switched off when the module is in
standby.
The values of VOLmin, VOLmax and IL(off2) are available in the electrical characteristics
section.
Figure 25. Open-load detection in off-state
V batt.
VPU
VCC
RPU
INPUT
DRIVER
+
LOGIC
IL(off2)
STATUS
+
R
-
OUT
VOL
RL
GROUND
18/27
Doc ID 16812 Rev 1