LTPH245 Ver la hoja de datos (PDF) - Seiko Instruments Inc

Número de pieza

componentes Descripción

Fabricante

LTPH245

LINE THERMAL PRINTER MECHANISM TECHNICAL REFERENCE

Seiko Instruments Inc 

8.2 HEAD CLEANING PROCEDURE AND PRECAUTIONS

8.2.1 PRECAUTIONS

1) Do not clean the thermal head immediately after printing because thermal head and its

periphery are hot during and after printing.

2) Do not use sandpaper, cutter knives etc. when cleaning. They will damage the heat

elements.

8.2.2 PROCEDURE

1) Turn the release lever in the direction of the arrow shown in Figure 8-1. After confirming that

the platen block has separated from the printer mechanism, lift the platen block up.

2) Clean the heat elements using alcohol and a cotton swab.

3) Wait until the alcohol dries and close the platen block.

Heat Element

Figure 8-3 Head Cleaning Procedure

8-3

Share Link: