Dimensions LB 200-S/SP4 (in mm. 1 mm = 0.0394 inch)
Front view
Left view
Secondary terminals
Terminal + : supply voltage + 15 V
Terminal M : measure
Terminal - : supply voltage - 15 V
Terminal E : shield
Connection
Top view
Mechanical characteristics
• General tolerance
• Fastening
• Primary through-hole
• Connection of secondary
± 0.2 mm
2 holes ∅ 5.5 mm
∅ 20 mm
Faston 6.3 x 0.8 mm
Remarks
• IS is positive when IP flows in the direction of the arrow.
• Temperature of the primary conductor should not exceed
70°C.
• Dynamic performances (di/dt and response time) are best
with a single bar completely filling the primary hole.
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice.