AQ2A1-C1-ZT5VDC Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
AQ2A1-C1-ZT5VDC Datasheet PDF : 7 Pages
| |||
AQ8
• 3 A type
Part No. AQ3A1-C1-
T5VDC
AQ3A1-C2-
Item
T5VDC
Control voltage
Input
side Input impedance
5 V DC
(4 to 6V)
Approx. 0.3 kΩ
Drop-out voltage
Min. 0.5 V
AQ3A1-C1-
T12VDC
AQ3A1-C2-
T12VDC
12 V DC
(9.6 to 14.4V)
Approx. 0.8 kΩ
Min. 1.2 V
AQ3A1-C1-
T24VDC
AQ3A1-C2-
T24VDC
24 V DC
(21.6 to 26.4V)
Approx. 1.8 kΩ
Min. 2.4 V
AQ3A2-C1-
T5VDC
AQ3A2-C2-
T5VDC
5 V DC
(4 to 6V)
Approx. 0.3 kΩ
Min. 0.5 V
AQ3A2-C1-
T12VDC
AQ3A2-C2-
T12VDC
12 V DC
(9.6 to 14.4V)
Approx. 0.8 kΩ
Min. 1.2 V
AQ3A2-C1-
T24VDC
AQ3A2-C2-
T24VDC
24 V DC
(21.6 to 26.4V)
Approx. 1.8 kΩ
Min. 2.4 V
Max. load current
3 A*2
Load
side
Load voltage
Frequency
Repetitive peak
OFF voltage
Non-repetitive
surge current
Max. “OFF-state”
leakage current
Max. “ON-state”
voltage drop
Min. load current
75 to 125 V AC
400 V
2.5 mA (100 V applied)
25 mA*4
45 to 65 Hz
80 A*3
1.6 V
75 to 250 V AC
600 V
5 mA (200 V applied)
50 mA*4
OFF state dV/dt
50 V/μs
Notes: *1. Refer to REFERENCE DATA “3. Characteristics of input current vs. input voltage”.
*2. Refer to REFERENCE DATA “1. Characteristics of load current vs. ambient temperature”.
*3. Refer to REFERENCE DATA “2. characteristics of non-repetitive surge current vs. carrying time”.
*4. When the load current is less than the rated minimum load current, please refer to “Cautions for Use of SSR”.
Remarks
*1
At ambient temperature of
30°C or less
In one cycle at 60 Hz
at 60 Hz
at max. carrying current
At ambient temperature of
80°C
2. Characteristics (Ambient temperature: 20°C 68°F; Input voltage ripple: 1% or less)
Item
Type
Zero-cross type
Random type
Operate time, max.
1/2 cycle of voltage sine wave + 1 ms
1 ms
Release time, max.
Insulation resistance, min.
Breakdown voltage
1/2 cycle of voltage sine wave + 1 ms
109Ω between input and output
3,000 V AC between input and output
Vibration
resistance
Destructive
Functional
10 to 55 Hz at double amplitude of 3 mm
10 to 55 Hz at double amplitude of 3 mm
Shock
resistance
Destructive
Functional
Ambient temperature
Storage temperature
Operational method
Min. 980 m/s2 {100 G}
Min. 980 m/s2 {100 G}
–30°C to +80°C –22°F to +176°F
–30°C to +100°C –22°F to +212°F
Zero-cross (Turn ON and Turn OFF)
Random turn ON, zero-cross turn OFF
Remarks
at 500 V DC
For 1 minute
1 hour for X, Y, Z axis
10 min. for X, Y, Z axis
5 times each for X, Y, Z axis
4 times each for X, Y, Z axis
REFERENCE DATA
1. Characteristics of load current vs. ambient
temperature
Use load current within range specified in the figure
below.
2.-(1) Characteristics of non-repetitive surge
current vs. carrying time
(2 A type)
3.0
3 A type
2.5
2 A type
2.0
1.5
1.0
0.5
0
–30 0 20 40 60 80
Ambient temperature, °C
100
80
60
40
20
0
5 10
50 100
No. of cycles at 60 Hz
2.-(2) Characteristics of non-repetitive surge
current vs. carrying time
(3 A type)
100
80
60
40
20
0
5 10
50 100
No. of cycles at 60 Hz
–4–
ASCTB213E 201410-T
Share Link: 