EM73201BK Ver la hoja de datos (PDF) - ELAN Microelectronics

Número de pieza

componentes Descripción

Fabricante

EM73201BK

4-BIT MICRO-CONTROLLER FOR GENERAL PURPOSE PRODUCT

ELAN Microelectronics 

EM73201

4-BIT MICRO-CONTROLLER FOR GENERAL PURPOSE PRODUCT

Preliminary

INTERRUPT STRUCTURE

MASK0 MASK1 MASK1 MASK2 MASK3

INT1

TBI

r0

r1

r2

TRGA

r3

r4

Reset by system reset and program

instruction

IL0

IL1

IL2

IL3

IL4

INT0

r5

IL5

Reset by system reset and program

instruction

Set by program instruction

Priority checker

EI

Entry address generator

Interrupt controller:

Interrupt request

Interrupt entry address

IL0-IL5

: Interrupt latch . Hold all interrupt requests from all interrupt sources. ILr can not be

set by program, but can be reset by program or system reset, so IL only can decide

which interrupt source can be accepted.

MASK0-MASK3 : Except INT0 ,MASK register can promit or inhibit all interrupt sources.

EI

: Enable interrupt Flip-Flop can promit or inhibit all interrupt sources, when inter-

rupt happened, EI is cleared to "0" automatically, after RTI instruction happened,

EI will be set to "1" again .

Priority checker: Check interrupt priority when multiple interrupts happened.

INTERRUPT FUNCTION

The procedure of interrupt operation:

1. Push PC and all flags to stack.

2. Set interrupt entry address into PC.

3. Set SF= 1.

4. Clear EI to inhibit other interrupts happened.

5. Clear the IL for which interrupt source has already be accepted.

6. To excute interrupt subroutine from the interrupt entry address.

7. CPU accept RTI, restore PC and flags from stack . Set EI to accept other interrupt requests.

PROGRAM EXAMPLE: To enable interrupt of "INT0, TRGA"

LDIA #1100B;

EXAE; set mask register "1100B"

EICIL 111111B ; enable interrupt F.F.

POWER SAVING FUNCTION ( Sleep / Hold functlon )

* This specification are subject to be changed without notice.

7.20.1999 16

Share Link: