E702196_SH7750 Ver la hoja de datos (PDF) - MITSUBISHI ELECTRIC
Número de pieza
componentes Descripción
Fabricante
E702196_SH7750
MITSUBISHI ELECTRIC
E702196_SH7750 Datasheet PDF : 237 Pages
| |||
Preface
Thank you for purchasing the E10A emulator.
CAUTION
READ section 2, Preparation before Use, of this User’s Manual before using the emulator
product. Incorrect operation will damage the user system and the emulator product.
This emulator is an efficient development tool for software and hardware of user systems based on
Hitachi’s original microprocessor. The emulator operates using the Hitachi debugging interface
(hereafter referred to as the HDI), which is the interface program that runs on Microsoft®
Windows® 95, Microsoft® Windows® 98, or Microsoft® Windows NT® operating system.
This manual describes the functions and operating procedures of the E10A emulator. Sections 1 to
5 describe common features of all types of E10A emulators. Section 6 describes supplements to
the E10A emulator. Read section 1.1, Warnings, carefully before using the emulator.
This manual consists of six sections. The information contained in each section is summarized
below:
• Section 1, Overview, gives the emulator overview.
• Section 2, Preparation before Use, gives instructions for first-time users, such as preparation
before use and system connection.
• Section 3, Tutorial, describes HDI operating examples.
• Section 4, Descriptions of Windows, describes HDI windows for operating the emulator.
• Section 5, Command-line Functions describes how to input HDI commands and command
types.
• Section 6, SHxxxx E10A Emulator Specifications describes the features of the E10A emulator
for each MCU. Section 7 describes the important information of the E10A emulator according
to emulator products. Read these sections before using the E10A emulator.
The HDI installation disks are provided by the CD-R. Refer to the descriptions in the manuals of
the host computer or operating system.
Rev. 2.0, 01/01, page i of x
Share Link: