SSD1858 Ver la hoja de datos (PDF) - Solomon Systech

Número de pieza

componentes Descripción

Fabricante

SSD1858

LCD Segment / Common Driver with Controller CMOS

Solomon Systech  

6.20 M

This pin is used for cascade purpose only. Under normal operation, it should be left open.

6.21 MID0~MID2

These pins are used for setting the ID code of LCD panel manufacturer. These pins should be

connected to VSS or VDD when NOT IN USE.

6.22 SYNC

This pin is used for cascade purpose only. Under normal operation, it should be left open.

6.23 MODE

This pin is used for setting the display size.

Table 5 – Mode setting

MODE

H

L

Remarks:

SSD1858 96x65 display mode

SSD1858 104x65 display mode

6.24 TEST_IN0~1

These pins is used for internal only and should be connected to Vss.

6.25 TEST0~14

These pins is used for internal only and should be left open, any connection is not allowed.

6.26 N/C

These No Connection pins should NOT be connected to any signal pins nor shorted together. They

should be left open.

6.27 Dummy

There are the floating dummy pads without any internal circuitry connection.

11

SSD1858

Rev 1.1

09/2002

SOLOMON

Share Link: