78211-014LF Ver la hoja de datos (PDF) - First Components International
Número de pieza
componentes Descripción
Fabricante
78211-014LF
First Components International
78211-014LF Datasheet PDF : 16 Pages
| |||
TYPE
PRODUCT SPECIFICATION
NUMBER
BUS-12-067
TITLE
Crimp-to Wire, Mini-PV™ Receptacles and Mini-Latch Housings
PAGE
REVISION
13 of 16
K
AUTHORIZED BY
DATE
H.T. Brewbaker 31-May-06
CLASSIFICATION
UNRESTRICTED
9.3.2 Contact - Sixty (60) contacts crimped to each size wire as specified in Table V shall be
subjected to the qualification inspection. A separate group of sixty (60) contacts shall be
subjected to test for each combination of contact area, plating and wire size.
TABLE V - CONTACT SAMPLES
Wire Size, AWG
CRIMP HEIGHT
MINIMUM MAXIMUM
18
X
20
X
22
X
26
X
28
X
32
X
34
X
36
X
9.4 Preparation of Samples
9.4.1 Mating Headers - Seventeen (17) mating headers, ten of the largest and seven of the smallest
population, configured and conforming to the requirements of Figure 6 shall be prepared.
9.4.2 Receptacles
Sample
Number
Description
1
Individuals contacts crimped to each size wire as specified in table V.
2
Individual contacts crimped each size wire as specified in table V.
3
3 largest & 3 smallest populated connectors terminals crimped to wire
4
3 largest populated connector with terminals crimped without wires.
5
1 largest & 1 smallest populated connectors with terminals crimped to
dual wires
6
2 largest & 2 smallest populated connectors with terminals crimped to
dual wires
7
1 largest & 1 smallest populated connectors with terminals crimped to
dual wires.
Quantity Number of
Connector Terminals
Assemblies Tested
0
30ea.
0
30ea.
6
30*ea.
3
30
2
All
4
All
2
All
*NOTE: Except all contacts used for total mating force.
*NOTE: Except use a total of 30 contacts for individuals contact insertion/withdrawal forces.
9.4.3 Stranded Wire - All stranded wire used in these qualification test samples shall conform to the
requirements of MIL-W-16878, Type B.
Copyright FCI
Form E-3334
Rev E
PDM: Rev:K
GS-01-001
STATUS:Released Printed: Nov 28, 2010.
Share Link: