1214-510 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

1214-510

Zirconia Oxygen Analyzer

Unspecified 

www.DataSheet4U.com

December 2004

The Sample System

In addition to the components supplied with the CGA 351, an external

sample system may be required to ensure that the analyzer is fed a

properly conditioned sample or calibration gas stream. In particular,

the gas must be clean and dry, and it must be delivered to the analyzer

at atmospheric pressure.

Note: A suitable sample system, which will be supplied completely

assembled on its own mounting plate, may be ordered directly

from the factory.

Commonly used sample system components include filters, pressure

regulators, pressure gauges, by-pass loops, and sample pumps. It is

recommended that stainless steel construction be used for all wetted

parts of the sample system. A typical sample system is shown in

Figure 1-3 below.

CAL-GAS

INLET

SAMPLE

INLET

SAMPLE

OUTLET

Figure 1-3: Typical Sample System

General Information

1-3

Share Link: