NTMD3N08LR2G Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
NTMD3N08LR2G
ON Semiconductor
NTMD3N08LR2G Datasheet PDF : 8 Pages
| |||
NTMD3N08LR2
SAFE OPERATING AREA
The Forward Biased Safe Operating Area curves define
the maximum simultaneous drain−to−source voltage and
drain current that a transistor can handle safely when it is
forward biased. Curves are based upon maximum peak
junction temperature and a case temperature (TC) of 25°C.
Peak repetitive pulsed power limits are determined by using
the thermal response data in conjunction with the procedures
discussed in AN569, “Transient Thermal Resistance −
General Data and Its Use.”
Switching between the off−state and the on−state may
traverse any load line provided neither rated peak current
(IDM) nor rated voltage (VDSS) is exceeded, and that the
transition time (tr, tf) does not exceed 10 ms. In addition the
100
VGS = 20 V
SINGLE PULSE
TC = 25°C
10
1
10 ms
100 ms
1 ms
10 ms
total power averaged over a complete switching cycle must
not exceed (TJ(MAX) − TC)/(RqJC).
This power MOSFET can be safely used in switching
circuits with unclamped inductive loads. For reliable
operation, the stored energy from circuit inductance
dissipated in the transistor while in avalanche must be less
than the rated limit and must be adjusted for operating
conditions differing from those specified. Although industry
practice is to rate in terms of energy, avalanche energy
capability is not a constant. The energy rating decreases
non−linearly with an increase of peak current in avalanche
and peak junction temperature.
25
ID = 2.3 A
20
15
10
0.1
0.01
0.1
RDS(on) LIMIT
THERMAL LIMIT
dc
PACKAGE LIMIT
1
10
100
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
5
0
25
50
75
100
125
150 175
TJ, STARTING JUNCTION TEMPERATURE (°C)
Figure 12. Maximum Avalanche Energy versus
Starting Junction Temperature
http://onsemi.com
6
Share Link: