WM8778EDS(2004) Ver la hoja de datos (PDF) - Wolfson Microelectronics plc
Número de pieza
componentes Descripción
Fabricante
WM8778EDS Datasheet PDF : 50 Pages
| |||
Product Preview
DACBCLK
ADCBCLK
ADCLRC
WM8778
CODEC DACLRC
DOUT
DIN
DVD
Controller
WM8778
Figure 11 Master Mode
AUDIO INTERFACE FORMATS
Audio data is applied to the internal DAC filters or output from the ADC filters, via the Digital Audio
Interface. 5 popular interface formats are supported:
• Left Justified mode
• Right Justified mode
• I2S mode
• DSP Early mode
• DSP Late mode
All 5 formats send the MSB first and support word lengths of 16, 20, 24 and 32 bits, with the
exception of 32 bit right justified mode, which is not supported.
In left justified, right justified and I2S modes, the digital audio interface receives DAC data on the DIN
input and outputs ADC data on DOUT. Audio Data for each stereo channel is time multiplexed with
ADCLRC/DACLRC indicating whether the left or right channel is present. ADCLRC/DACLRC is also
used as a timing reference to indicate the beginning or end of the data words.
In left justified, right justified and I2S modes; the minimum number of BCLKs per DACLRC/ADCLRC
period is 2 times the selected word length. ADCLRC/DACLRC must be high for a minimum of word
length BCLKs and low for a minimum of word length BCLKs. Any mark to space ratio on
ADCLRC/DACLRC is acceptable provided the above requirements are met.
In DSP early or DSP late mode, DACLRC is used as a frame sync signal to identify the MSB of the
first word. The minimum number of DACBCLKs per DACLRC period is 2 times the selected word
length. Any mark to space ratio is acceptable on DACLRC provided the rising edge is correctly
positioned. The ADC data may also be output in DSP early or late modes, with ADCLRC used as a
frame sync to identify the MSB of the first word. The minimum number of ADCBCLKs per ADCLRC
period is 2 times the selected word length.
w
PP Rev 1.7 June 2004
17
Share Link: 