Prepared
Checked
Approved
Product Specifications
(Technical Data)
AN17850A
Ref No.
G-6
Total Page
17
Page No.
16
Standby operation
51kΩ
5
STB
10µF
FIG4. Standby Application circuit
Standby pin should be connected with carefully
selected components in order to avoid
“Pop Noise” during Standby ON/OFF transient.
The 51k resistor and 10uF capacitor pair can
delay the rising of voltage at pin 5 to reach the
Standby threshold. When Standby is switching
on together with supply, this delay would be very
useful to ensure no “Pop Noise”.
If the Standby voltage is provided by a microcontroller, the suppression of “Pop” could even
be better.
For further details of timing and delay for standby circuit, please refer to page 11.
Mute operation
Mute pin should be connected with carefully
selected components in order to avoid
“Pop Noise” during MUTE ON/OFF transient.
8.2kΩ
6
Mute
The 8.2k resistor and 33uF capacitor pair can delay
the rising of voltage at pin 6 to reach the Mute
threshold. When Mute is switching on together
with supply, this delay would be very useful to
ensure no “Pop Noise”.
33µF
FIG5. Mute application circuit
For further details of timing and delay for Mute application circuit, please refer to page 11.
Eff. Date Eff. Date
15-AUG-03
FMSC-PSDA-002-01 REV 1
Eff. Date
Eff. Date
Semiconductor Company, Matsushita Electric Industrial Co., Ltd.