L6206
ELECTRICAL CHARACTERISTICS (continued)
(Tamb = 25 °C, Vs = 48V, unless otherwise specified)
Symbol
Parameter
Test Conditions
IIH High Level Logic Input Current 7V Logic Input Voltage
Vth(ON) Turn-on Input Threshold
Vth(OFF) Turn-off Input Threshold
Vth(HYS) Input Threshold Hysteresis
Switching Characteristics
tD(on)EN Enable to out turn ON delay time (7) ILOAD =2.8A, Resistive Load
tD(on)IN Input to out turn ON delay time ILOAD =2.8A, Resistive Load
(dead time included)
tRISE Output rise time(7)
ILOAD =2.8A, Resistive Load
tD(off)EN Enable to out turn OFF delay time (7) ILOAD =2.8A, Resistive Load
tD(off)IN Input to out turn OFF delay time ILOAD =2.8A, Resistive Load
tFALL Output Fall Time (7)
ILOAD =2.8A, Resistive Load
tdt Dead Time Protection
fCP Charge pump frequency
-25°C<Tj <125°C
Over Current Detection
Is over Input Supply Over Current
DetectionThreshold
-25°C<Tj <125 °C; RCL= 39 kΩ
-25°C<Tj <125 °C; RCL= 5 kΩ
-25°C<Tj <125 °C; RCL= GND
ROPDR Open Drain ON Resistance
I = 4mA
tOCD(ON) OCD Turn-on Delay Time (8)
I = 4mA; CEN < 100pF
tOCD(OFF) OCD Turn-off Delay Time (8)
I = 4mA; CEN < 100pF
(6) Tested at 25°C in a restricted range and guaranteed by characterization.
(7) See Fig. 1.
(8) See Fig. 2.
Min Typ Max Unit
10
µA
1.8
2.0
V
0.8
1.3
V
0.25 0.5
V
100 250 400
ns
1.6
µs
40
250
ns
300 550 800
ns
600
ns
40
250
ns
0.5
1
0.6
µs
1
MHz
-10% 0.57 +10% A
-10% 4.42 +10% A
-30% 5.6 +30% A
40
60
Ω
200
ns
100
ns
6/23