Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Descripción + Búsqueda de contenido

Consulta
Número de pieza(s) : L135 L250 L400
Gilway
Gilway Technical Lamp
componentes Descripción : T-1 Mini-Max flashlight Lamps

T-1 Mini-Max flashlight Lamps

IR
International Rectifier
componentes Descripción : SMPS/LED driver PFC + HALF-BRIDGE CONTROL IC

Description
The IRS2548D is a fully integrated, fully protected 600V LED or switched mode power supply control IC with integrated PFC control for a Boost pre-regulator. The IRS2548D is based on the popular IRS2168D electronic ballast control IC re-designed for use in LED driver or half-bridge power supply applications. The PFC circuitry operates in critical conduction mode and provides high PF, low THD and DC bus regulation.

Features
• PFC, system control and half-bridge driver in one IC
• Critical-conduction mode boost-type PFC
• Programmable PFC over-current protection
• Half Bridge driver
• Half Bridge Over Current Protection
• Variable Frequency Oscillator
• Fixed internal 1.6us HO and LO deadtime
• Internal bootstrap MOSFET
• Internal 15.6V zener clamp diode on Vcc
• Micropower startup (250µA)
• Latch immunity and ESD protection

Typical Applications
• Isolated LED drivers
• Power Supplies

Número de pieza(s) : LC7958NC LC7958
SANYO
SANYO -> Panasonic
componentes Descripción : CMOS IC 64-Bit LED driver for 300 dpi Printers

Overview
LC7958NC is a 64-bit constant current LED driver IC designed to directly drive LED head array.
The output terminals for LED drive are arranged in 2-row staggered position of 80-µm pitch at one side. It enables drive of LED Array of 300-dpi in one side disposition, 600dpi in both sides disposition.

Features and Functions
• Logic voltage (VDD): +5 V ± 10 %
LED drive current (IOH): 5.0 mA (TYP)
• Clock frequency (fc): 10 MHz
• Output current control circuit built in
• Mode switching function by the SEL pin
• Chip size:  1.43 mm × 5.39 mm
• Number of pads: 86
• 64-bit shift register circuit
• 64-bit latch  circuit
• Output driver on/off switching function
• Constant current circuit
• 64-bit p-channel open drain LED driver

IR
International Rectifier
componentes Descripción : LED driver CONTROL IC

Description
The IRS2980S utilizes International Rectifiers control and high-voltage technologies to realize a simple, high-performance Buck LED driver solution. This solution is based on hysteretic output current regulation typically operating from 25 kHz to 120 kHz. Frequency and duty cycle vary to maintain a tightly regulated average output current over variations in line and load. Output current ripple will depend on inductor selection in conjunction with input and output voltages as well as output current and component selection. The IRS2980S uses a unique floating high side differential current sense and level shift scheme allowing hysteretic operation with a low side switching MOSFET optimizing size and cost. In addition, the IRS2980S includes a high voltage regulator able to operate up to 450V eliminating the need for an external VCC supply. A PWM dimming interface is also included that can be controlLED from a 0 to 2V analog or 3.3 or 5V logic control signal able to operate up to 1kHz offering brightness control from 0 to 100%. A programmable on board PWM oscillator is used with DC dimming control.

IC Features
• Dimming LED driver controller
• Hysteretic Current Regulation
• Closed-loop LED current dimming control
• Analog/PWM Dimming Input
• Internal High Voltage Regulator
• Internal 15.6V zener clamp diode on Vcc
• Micropower startup (250μA)
• Latch immunity and ESD protection

LED driver System Features
• Single chip dimming solution
• Simple LED current dimming control method
• No external protection circuits required (fully internal)
• Low external component count
• Easy to use for fast design cycle time
• Increased manufacturability and reliability

Typical applications
LED incandescent/CFL replacement lamps
LED driver module

Número de pieza(s) : MIC2870 MIC2870YFT
Micrel
Micrel
componentes Descripción : 1.5A Synchronous Boost Flash LED driver with I2C Interface

General Description
The MIC2870 is a high-current, high-efficiency flash LED driver for one or two high-brightness camera flash LEDs.
The LED driver current is generated by an integrated inductive boost converter with 2MHz switching frequency which allows the use of a very-small inductor and output capacitor. These features make the MIC2870 an ideal solution for high-resolution camera phone LED flashlight driver applications.

Features
• Up to 1.5A flash LED driving current
    − 2.7V to 5.0V input voltage range
• High-efficiency 2MHz VF adaptive boost driver
• Configurable 1 or 2 channel(s) WLED driver
LED driving current soft-start
• Control through I2C interface or external pins
• Flash inhibit function for GSM pulse synchronization
• True load disconnect
• Flash time-out protection
• 1µA shutdown current
• Available in 16-pin 2mm × 2mm TQFN package

Applications
• Camera phones/mobile handsets
• Cellular phones/smart phones
LED light for image capture/auto focus/white balance
• Handset video light (torch light)
• Digital cameras
• Portable applications

Número de pieza(s) : HV9803LG-G HV9803
Supertex
Supertex Inc
componentes Descripción : LED driver IC with Average-Mode Constant Current Control

General Description
The HV9803 is an open loop average-mode current control LED driver IC operating in a constant off-time mode. The IC features ±2% current accuracy, tight line and load regulation of the LED current without any need for loop compensation or high-side current sensing. Its auto-zero circuit cancels the effect of both the input offset voltage and the propagation delay in the current sense comparator.

Features
► Fast average current control
► Correction for propagation delay and offset voltage
► Fixed off-time switching mode
► Linear dimming input
► PWM dimming input
► Output short circuit protection with programmable skip mode
► Input under-voltage shutdown

Applications
► Backlighting of LCD Panels

Número de pieza(s) : HV9803BLG-G HV9803B
Supertex
Supertex Inc
componentes Descripción : LED driver IC with Average-Mode Constant Current Control

General Description
The HV9803B is an open loop average-mode current control LED driver IC operating in a constant off-time mode. The IC features ±2% current accuracy, tight line and load regulation of the LED current without any need for loop compensation or high-side current sensing. Its auto-zero circuit cancels the effect of both the input offset voltage and the propagation delay in the current sense comparator.

Features
► Fast average current control
► Correction for propagation delay and offset voltage
► Fixed off-time switching mode
► Linear dimming input
► PWM dimming input
► Output short circuit protection with programmable skip mode
► Input under-voltage shutdown

Applications
► Backlighting of LCD Panels
► General Lighting

componentes Descripción : FLASH LIGHT LED driver

DESCRIPTION

The AMC7123/4 is member of ADDM North Star White/Blue LED driver family. No external

component is required. Especially good for use flashlight LED driver. The special circuit design

provides over 90% efficiency in low noise. The AMC7123/4 is Integrated with 2 control pins for

LEDs driving current control.  



FEATURES

No external component required. 

Programmable output current control by ENL, ENH.

120mA LED driving capability. 

Output short / open circuit protection. 

1 channel, 3 channels available in MSOP-8 package.

High efficiency.

Thermal Shutdown protection.

Supply voltage range 2.7V ~ 6V

0.1uA Shut-Down current

Advanced Bi-CMOS process.


Número de pieza(s) : BD8105FV BD8105FV-E2
ROHM
ROHM Semiconductor
componentes Descripción : Power Management IC Series for Automotive Body Control(LED driver)

Power Management IC Series for Automotive Body Control(LED driver)



●Description

The BD8105FV is a serial parallel control LED driver with 35V input voltage rating.

Responding to the 3-line serial data, it turns the 12ch open drain output on/off.

Due to its compact size, it is optimal for small spaces.



●Features

 1)  Open Drain Output

 2)  3-line Serial Control + Enable Signal

 3)  Internal Temperature Protection Circuit (TSD)

 4)  Cascade Connection Compatible

 5) SSOP-B20W

 6)  Internal 12ch Power Transistor



●Applications

These ICs can be used with car and consumer electronic.


Número de pieza(s) : HV9803 HV9803LG HV9803LG-G
SUTEX
Supertex Inc
componentes Descripción : LED driver IC with Average-Mode Constant Current Control

General Description
The HV9803 is an open loop average-mode current control LED driver IC operating in a constant off-time mode. The IC features ±2% current accuracy, tight line and load regulation of the LED current without any need for loop compensation or high-side current sensing. Its auto-zero circuit cancels the effect of both the input offset voltage and the propagation delay in the current sense comparator.

Features
►Fast average current control
►Correction for propagation delay and offset volta
►Fixed off-time switching mode
►Linear dimming input
►PWM dimming input
►Output short circuit protection with programmable skip mode
►Input under-voltage shutdown

Applications
►Backlighting of LCD Panels

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]